Bulk paper ball
Despite the large number of modules, this volume ball is easy to assemble. The main thing is to be patient and do everything strictly according to the scheme. Paper for crafts must be taken tight, then the ball will be good to keep in shape. To make such a ball, you need 5 square sheets of white paper and 2 square sheets of colored paper. The square can be made from landscape paper. For the craft, you need 20 white modules and 12 modules of any other color. First prepare the white modules. Each module is an equilateral hexagon with three mounts. To make blanks for hexagons, take all the white squares and fold them in half. Cut in the fold. You will have 10 rectangles.
Take a rectangle.
Fold it in half inlength.
Expand. Bend the right side so that the bottom corner coincides with the central fold (where the label is).
Left side of the rectangle bend, making bottom corner, combining the lower part of it with the fold.
Turn the blank on the other side.
The left part crafts, bend to the right along the edge of the triangle (where the pointer is), which turned out on the workpiece.
Expand the sheet. Two triangles should appear in the middle of it.
Cut into folds. You will not need the edges of the sheet and put the triangles aside. Cut out the triangles in the same way from the other squares. You will get 20 triangles.
Take one triangle.
Fold it in half by fold.
Top move the moving part in half.
Detail turn left 90 °. Fold the top corner on the dotted line.
Fold the top half in half.
Again, turn the craft to the left by 90 ° and along the dotted line bend downwards.
Fold the bent part in half.
In the middle of the blank you got a pocket. Hide the lid of the triangle inside.
Around the blue module should be placed 5 white, fastened together. Only the first and fifth modules will not be connected. They must be sealed with a blue module.
Lay it so that the top of the pentagon looks at the connector and its wings look to the sides. This is a must, otherwise the assembly process will fail and you will not be able to collect the ball. Then act on the same principle: 5 white modules fasten around the blue,and the first and fifth white modules are stapled in blue.
To keep the parts from getting out of the pockets, you can glue each attachment from the inside out using scotch.
The most difficult thing is to finish the craft. Gently hold the remaining modules together. The latest scotch modules can be put on top by making the ball stronger. That is such a beautiful ball you get.
What is a capsuleAutomotive PrintsLean mayonnaise at homeHow to make a bookshelfWhat is powerWhat is a biopsyHow to read wellHow to determine your flat feet