How to assemble a generator?
Watch the video
You may need to assemble a generator when energy is needed, and there is no access to stationary power sources. To build such a unit with your own hands is quite possible. It is important to prepare in advance all the necessary details and follow the sequence of work.
To assemble a generator, you will need to prepare:
- spinning reel;
- plastic disc with a diameter of 2-3 cm;
- motor with Paz;
Now go on to build the generator:
- Disassemble the coil, removing the fishing line, key, nut and rotating mechanism from it.
- Take a motor, place a disassembled coil on it, and then clamp it with two pieces of wire.
- Grease the coil and motor with silicone and glue.
- Cut a small groove in the disk, and in the center - a hole whose diameter should correspond to the axis of the coil.
- Place the disk in the center of the coil, then align it, and then tighten the elastic between the small and large motor. At this assembly of the generator with his own hands will be completed. You will only need to check it out.
How to create a theme
Which diesel is better
Saving the hardened loaf
What is a commodity
How to draw a bone
How to make a complaint