/ Views: 72243

How to connect the starter?

Yuri Belousikov
Yuri Belousikov
December 19, 2014
How to connect the starter?

Watch the video

How to connect the starter?

Normal starting of the engine of the car is impossible without a well-adjusted starting system, and if the battery (battery) is correctly connected, it will give a signal to start the starter without any problems. From our article you will learn how to connect the starter in the car, or rather, how to connect the traction relay yourself.

We connect the relay to the starter

So, the first thing you need to make sure you have the tools: battery, probe and engine start system element. The system of starting the motor consists and functions due to the following components: battery, starter, relay, wires, ignition switches and system of starting blocking.

Now let's see what happens when you start the car. When you turn the key in the ignition switch, the voltage from the battery passes through the starter, then the relay moves, the drive gear connects to the flywheel, the contacts close, and the engine starts.

In order for you to be able to adjust the system, it is necessary to disconnect the voltage winding wires from the relay (the pin is labeled “M”). Then disconnect the battery (the one that is designed for 12V), connect it with the output of "M" and "S" (you will also see this designation on the findings). After the actions you have done, the drive gear will shift. To connect the relay to the starter, you need a probe to make an inspection of the gap between the gear and the stop. If necessary, you can make an adjustment of the gasket between the relay and the drive, removing or installing it accordingly.

Useful articles and schemes

You can learn about how to make a starter check in our article How to check a starter. To check the relay winding, it is necessary to connect all elements to the starter using the standard scheme.

Before making a connection, first disconnect the voltage winding wire (disconnect it from the output labeled “M”). If everything is in order, the gear will shift to the desired position.

[/L_REPEAT]

Related news


How to perform this calculation or tell the rule
Lean mayonnaise at home
How to name a boy in November
All the secrets of hot manicure
How to upload to iPhone
Where is Kaluga
Rest in the Carpathians